Effect of Humidity on Capacitance of Capacitors
Keywords:
Relative Humidity, Capacitance, Ceramic CapacitorAbstract
In this paper various capacitors are exposed to different levels of humidity. Under humid conditions, the capacitances of various capacitors vary due to the absorption of moisture. The effects of humidity are determined on the capacitance of various capacitors. A decrease in capacitances of various capacitors is observed.
How to cite this article:
Chauhan RS. Effect of Humidity on Capacitance of Capacitors. J Adv Res Electro Engi Tech 2020; 7(3&4): 21-23.
References
1. Chauhan, R. S, Project Report M.Sc.(Physics) JMI, 2004.
2. F. Yeung and Y.C. Chan, "Electrical failure of multilayer ceramic capacitors caused by high temperature and high humidity environment", Proceedings. 44th Electronic Components and Technology Conference, pp. 847-853, 1994.
3. Marina Santo Zarnic and Darko Belavi, An Experimental and Numerical Study of the Humidity Effect on the Stability of a Capacitive Ceramic Pressure Sensor, RADIOENGINEERING, VOL. 21, NO. 1, pp. 201-206, APRIL 2012.
4. Rajen Chanchani, Temperature-humidity-bias aging technique to identify defective surface mount capacitors, SAND, https://www.osti.gov/servlets/purl/10129891,1994.
5. N. E. Fenton and N. Ohlsson, "Quantitative analysis of faults and failures in a complex software system." IEEE Transactions on Software engineering, 26(8). pp. 797-814.
6. A. Dehbi, W. Wondrak, Y. Ousten and Y. Danto, "High temperature reliability testing of aluminum and tantalum electrolytic capacitors." Microelectronics Reliability, 42(6). pp. 835-840.
7. C. Bailey, H. Lu, S. Stoyanov, C. Yin, T. Tilford and S. Ridout, "Predictive reliability and prognostics for electronic components: Current capabilities and future challenges," in 31st International Spring Seminar on Electronics Technology, ISSE'08, pp. 67-72, 2008.
8. Cherry Bhargava, Shivani Gulati, and Pardeep Kumar Sharma, DSSCC: Decision Support System for Ceramic Capacitor using Fuzzy Logic, IJITEE, Volume-8 Issue-9, pp. 3281-3286, July 2019.
2. F. Yeung and Y.C. Chan, "Electrical failure of multilayer ceramic capacitors caused by high temperature and high humidity environment", Proceedings. 44th Electronic Components and Technology Conference, pp. 847-853, 1994.
3. Marina Santo Zarnic and Darko Belavi, An Experimental and Numerical Study of the Humidity Effect on the Stability of a Capacitive Ceramic Pressure Sensor, RADIOENGINEERING, VOL. 21, NO. 1, pp. 201-206, APRIL 2012.
4. Rajen Chanchani, Temperature-humidity-bias aging technique to identify defective surface mount capacitors, SAND, https://www.osti.gov/servlets/purl/10129891,1994.
5. N. E. Fenton and N. Ohlsson, "Quantitative analysis of faults and failures in a complex software system." IEEE Transactions on Software engineering, 26(8). pp. 797-814.
6. A. Dehbi, W. Wondrak, Y. Ousten and Y. Danto, "High temperature reliability testing of aluminum and tantalum electrolytic capacitors." Microelectronics Reliability, 42(6). pp. 835-840.
7. C. Bailey, H. Lu, S. Stoyanov, C. Yin, T. Tilford and S. Ridout, "Predictive reliability and prognostics for electronic components: Current capabilities and future challenges," in 31st International Spring Seminar on Electronics Technology, ISSE'08, pp. 67-72, 2008.
8. Cherry Bhargava, Shivani Gulati, and Pardeep Kumar Sharma, DSSCC: Decision Support System for Ceramic Capacitor using Fuzzy Logic, IJITEE, Volume-8 Issue-9, pp. 3281-3286, July 2019.
Published
2021-06-05
