Revolutionizing Industrial Sustainability: Harnessing the Potential of Plastic Waste Recycling
Abstract
Despite making a significant contribution to the worldwide problem of plastic pollution, high-income countries are driving up plastic usage. Due to poor management, such as when they are ingested by fish and damaging to human health (cancer is a major disease), the enormous amounts of plastic garbage pose a serious threat to the ecosystem and its inhabitants. In order to increase environmental sustainability, a treatment for plastic trash was examined in this review paper. Since it can replace all solid components, it has been discovered that using recycled plastic waste as a component is the most advantageous.
References
1. P. O. Awoyera and A. Adesina, “Plastic wastes to construction products: Status, limitations and future perspective,” Case Stud. Constr. Mater., vol. 12, p. e00330, 2020.
2. J. Jambeck et al., “Challenges and emerging solutions to the land-based plastic waste issue in Africa,” Mar. Policy, vol. 96, no. October 2017, pp. 256–263, 2018.
3. P. Singh and V. P. Sharma, “Integrated Plastic Waste Management: Environmental and Improved Health Approaches,” Procedia Environ. Sci., vol. 35, pp. 692–700, 2016.
4. S. J. Barnes, “Out of sight, out of mind: Plastic waste exports, psychological distance and consumer plastic purchasing,” Glob. Environ. Chang., vol. 58, no. July, p. 101943, 2019.
5. Y. C. Jang, G. Lee, Y. Kwon, J. hong Lim, and J. hyun Jeong, “Recycling and management practices of plastic packaging waste towards a circular economy in South Korea,” Resour.
6. Conserv. Recycl., vol. 158, no. December 2019, p. 104798, 2020. I. Kyrikou and D. Briassoulis, “Erratum: Biodegradation of agricultural plastic films: A critical review (Journal Polymers and the Environment (2007) vol. 15 (125-150) 10.1007/ s10924-007-0053-8),” J. Polym. Environ., vol. 15, no. 3, p. 227, 2007.
7. G. Swift, “Degradable Polymers and Plastics in Landfill Sites,” Encycl. Polym. Sci. Technol., pp. 1–13, 2015.
8. G. McNicholas and M. Cotton, “Stakeholder perceptions of marine plastic waste managementn the United Kingdom,” Ecol. Econ., vol. 163, no. April, pp. 77–87, 2019.
9. R. Geyer, J. R. Jambeck, and K. L. Law, “Production, use, and fate of all plastics ever made - Supplementary Information,” Sci. Adv., vol. 3, no. 7, pp. 19–24, 2017.
10. J. J. Klemeš, Y. Van Fan, R. R. Tan, and P. Jiang, “Minimising the present and future plastic waste, energy and
environmental footprints related to COVID-19,” Renew. Sustain. Energy Rev., vol. 127, no. April, 2020.
11. S. M. Al-Salem, Energy production from plastic solid waste (PSW). Elsevier Inc., 2018.
12. K. R. Vanapalli, B. Samal, B. K. Dubey, and J. Bhattacharya, Emissions and environmental burdens associated with plastic solid waste management. Elsevier Inc., 2018.
13. A. R. Migdał, J. Kijeński, A. Kawalec, A. Kȩdziora, P. Rejewski, and E. Śmigiera, “Energy recovery from waste plastics,” Chemik, vol. 68, no. 12, pp. 1065–1073, 2014.
14. S. Serranti and G. Bonifazi, Techniques for separation of plastic wastes, no. January 2018. Elsevier Ltd, 2019.
15. G. Faraca and T. Astrup, “Plastic waste from recycling centres: Characterisation and evaluation of plastic recyclability,” Waste Manag., vol. 95, pp. 388–398, 2019.
16. M. L. Mastellone, “Technical description and performance evaluation of different packaging plastic waste management’s systems in a circular economy perspective,” Sci. Total Environ.,vol. 718, p. 137233, 2020.
17. M. A. Binhussain and M. M. El-Tonsy, “Palm leave and plastic waste wood composite for outdoor
18. structures,” Constr. Build. Mater., vol. 47, pp. 1431–1435, 2013.
2. J. Jambeck et al., “Challenges and emerging solutions to the land-based plastic waste issue in Africa,” Mar. Policy, vol. 96, no. October 2017, pp. 256–263, 2018.
3. P. Singh and V. P. Sharma, “Integrated Plastic Waste Management: Environmental and Improved Health Approaches,” Procedia Environ. Sci., vol. 35, pp. 692–700, 2016.
4. S. J. Barnes, “Out of sight, out of mind: Plastic waste exports, psychological distance and consumer plastic purchasing,” Glob. Environ. Chang., vol. 58, no. July, p. 101943, 2019.
5. Y. C. Jang, G. Lee, Y. Kwon, J. hong Lim, and J. hyun Jeong, “Recycling and management practices of plastic packaging waste towards a circular economy in South Korea,” Resour.
6. Conserv. Recycl., vol. 158, no. December 2019, p. 104798, 2020. I. Kyrikou and D. Briassoulis, “Erratum: Biodegradation of agricultural plastic films: A critical review (Journal Polymers and the Environment (2007) vol. 15 (125-150) 10.1007/ s10924-007-0053-8),” J. Polym. Environ., vol. 15, no. 3, p. 227, 2007.
7. G. Swift, “Degradable Polymers and Plastics in Landfill Sites,” Encycl. Polym. Sci. Technol., pp. 1–13, 2015.
8. G. McNicholas and M. Cotton, “Stakeholder perceptions of marine plastic waste managementn the United Kingdom,” Ecol. Econ., vol. 163, no. April, pp. 77–87, 2019.
9. R. Geyer, J. R. Jambeck, and K. L. Law, “Production, use, and fate of all plastics ever made - Supplementary Information,” Sci. Adv., vol. 3, no. 7, pp. 19–24, 2017.
10. J. J. Klemeš, Y. Van Fan, R. R. Tan, and P. Jiang, “Minimising the present and future plastic waste, energy and
environmental footprints related to COVID-19,” Renew. Sustain. Energy Rev., vol. 127, no. April, 2020.
11. S. M. Al-Salem, Energy production from plastic solid waste (PSW). Elsevier Inc., 2018.
12. K. R. Vanapalli, B. Samal, B. K. Dubey, and J. Bhattacharya, Emissions and environmental burdens associated with plastic solid waste management. Elsevier Inc., 2018.
13. A. R. Migdał, J. Kijeński, A. Kawalec, A. Kȩdziora, P. Rejewski, and E. Śmigiera, “Energy recovery from waste plastics,” Chemik, vol. 68, no. 12, pp. 1065–1073, 2014.
14. S. Serranti and G. Bonifazi, Techniques for separation of plastic wastes, no. January 2018. Elsevier Ltd, 2019.
15. G. Faraca and T. Astrup, “Plastic waste from recycling centres: Characterisation and evaluation of plastic recyclability,” Waste Manag., vol. 95, pp. 388–398, 2019.
16. M. L. Mastellone, “Technical description and performance evaluation of different packaging plastic waste management’s systems in a circular economy perspective,” Sci. Total Environ.,vol. 718, p. 137233, 2020.
17. M. A. Binhussain and M. M. El-Tonsy, “Palm leave and plastic waste wood composite for outdoor
18. structures,” Constr. Build. Mater., vol. 47, pp. 1431–1435, 2013.
Published
2023-10-26
How to Cite
GOYAL, Sarit.
Revolutionizing Industrial Sustainability: Harnessing the Potential of Plastic Waste Recycling.
Journal of Advanced Research in Glass, Leather and Plastic Technology, [S.l.], v. 6, n. 1, p. 14-17, oct. 2023.
Available at: <http://thejournalshouse.com/index.php/glass-leather-plastic-technology/article/view/826>. Date accessed: 31 jan. 2025.
Section
Research Article
